- ページ 2

船舶用GPSシステム Garmin GPSMAP 441のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 441 28 ページ。 Marine navigation equipment
Garmin GPSMAP 441 にも：重要な安全情報 (4 ページ), 取付説明書 (12 ページ), リファレンス・マニュアル (2 ページ), ユーザーマニュアル (28 ページ), テクニカル・リファレンス (42 ページ), テンプレートマニュアル (2 ページ), 適合宣言 (1 ページ)

3. Install the unit in the opening (see Figure 2):

•

Place the unit housing in the recently cut hole in the mounting surface.

•

Slide the tension mount arms onto the hex bolts and secure them with the (4) wing nuts.

•

Tighten the (4) wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.

Assembled unit and

flush mount hardware

NOTE: If you are installing a Fishfinder 400C, the wiring harness must be connected to the boat's power supply and transducer per the installation

instructions included with the unit.

NOTE: If you are installing a GPSMAP 400 series unit, you must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna

(if applicable), and transducer (if applicable) per the installation instructions included with the unit.

Tension mount brackets

Figure 2

Wing nuts