- ページ 10

船舶用GPSシステム Garmin GPSMAP 500 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 500 Series 44 ページ。 Flat-mount kit
Garmin GPSMAP 500 Series にも：取扱説明書 (6 ページ), パイロット・マニュアル補遺 (27 ページ), クイック・リファレンス・マニュアル (2 ページ), リファレンス・マニュアル (2 ページ), 取扱説明書 (28 ページ), テンプレート (2 ページ), テンプレート (1 ページ), 設定マニュアル (2 ページ), クイック・スタート・マニュアル (4 ページ), オーナーズマニュアル (38 ページ), パイロット・マニュアル (28 ページ), 取付説明書 (34 ページ), クイック・リファレンス・マニュアル (2 ページ)

ページを印刷する

Select Measure Distance.

A push pin appears on the screen at your present location.

The distance and angle from the pin is listed in the upper-left

corner.

TIP: To reset the pin and measure from the current location of

the cursor, select Set Reference.

Chart Symbols

This table contains some of the common symbols you might see

on the detailed charts.

Icon

Description

Buoy

Information

Marine services

Tide station

Current station

Overhead photo available

Perspective photo available

Other features common to most charts include depth contour

lines, intertidal zones, spot soundings (as depicted on the

original paper chart), navigational aids and symbols,

obstructions, and cable areas.

Navigating to a Point on the Chart

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

NOTE: Auto Guidance is available with premium charts, in

some areas.

From the Navigation chart or Fishing chart, select a location.

If necessary, select SELECT.

Select Navigate To.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To.

• To use Auto Guidance, select Guide To.

Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due

to the settings for minimum safe water depth and minimum

safe obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Viewing Location and Object Information on a Chart

You can view information about a location or an object on the

Navigation chart or the Fishing chart.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

From the Navigation chart or Fishing chart, select a location

or object.

CAUTION

A list of options appears along the right side of the chart. The

options that appear vary based on the location or object you

selected.

Select an option:

• To view details of objects in the vicinity of the cursor,

select Review.

NOTE: Review does not appear if the cursor is not near

an object. If the cursor is near only one object, the name

of the object appears.

• To navigate to the selected location, select Navigate To.

• To mark a waypoint at the cursor location, select New

Waypoint.

• To view the distance and bearing of the object from your

current location, select Measure Distance.

The distance and bearing appear on the screen. Select

Set Reference to measure from a location other than

your current location.

• To view tide, current, celestial, chart notes, or local

services information near the cursor, select Information.

Viewing Details about Navaids

From the Navigation chart, Fishing chart, Perspective 3D chart

view, or Mariner's Eye 3D chart view, you can view details

about various types of navigation aids, including beacons,

lights, and obstructions.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are

available with premium charts, in some areas.

From a chart or 3D chart view, select a navaid.

If necessary, select Review.

Select the name of the navaid.

Selecting a Map

If your product has both BlueChart ® g2 and LakeVü™ HD built-

in maps, you can select which map to use. Not all models have

both types of built-in maps.

From the Navigation chart, select Menu > Built-in Map.

Select an option:

• When you are on an inland lake, select LakeVü™ HD.

• When you are offshore, select BlueChart® g2.

Premium Charts

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

NOTE: Not all models support all charts.

Optional premium charts, such as BlueChart g2 Vision ® , allow

you to get the most out of your chartplotter. In addition to

detailed marine charting, premium charts may contain these

features, which are available in some areas.

Mariner's Eye 3D: Provides a view from above and behind the

boat for a three-dimensional navigation aid.

Fish Eye 3D: Provides an underwater, three-dimensional view

that visually represents the sea floor according to the

information on the chart.

Fishing Charts: Shows the chart with enhanced bottom

contours and without navigational data. This chart works well

for offshore deep-sea fishing.

CAUTION

Charts and 3D Chart Views