Marine Video Cable
The included Marine Video 17-pin cable allows input of NTSC (National Television System Committee)/PAL (Phase Alternate Line) composite
video sources, and PC monitor output (4008/4208/4010/4210/5008/5208 = VGA output, 4012/4212/5012/5212/5015/5215 = XGA output).
Marine Video inputs are only available on the chartplotter to which they are attached and will not transmit over the Garmin Marine Network.
➊
and
➋
VIDEO 1 and VIDEO 2 Inputs (RCA connectors) allow input from two separate NTSC/PAL compatible video devices, such as VCR,
DVD, TV, or a video camera. The chartplotter can display one video input at a time or alternate between the two. See the owner's manual for
details. Sound from a video source must be attached to a separate stereo/audio system. The video output from video device attaches to the
Video 1 (Black Cable) or Video 2 (Gray Cable) RCA connectors.
➌
Use the PC monitor output (HD 15-pin) connector for remote viewing of the chartplotter display on a computer monitor. The remote monitor
must be capable of at least VGA resolution and have multi-sync capability.
➌
➌
➋
➋
➊
➊
GPSMAP 4000/5000 Series Installation Instructions
PIN 1
PIN 1
PIN 2
PIN 2
PIN 17
PIN 17
Marine Video Cable
Marine Video Cable
end View
end View
Note
Connector
rCA-1
➊
CeNTer
rCA-1 OUTer
rCA-2
➋
CeNTer
rCA-2 OUTer
HD-15 PIN 1
➌
HD-15 PIN 2
HD-15 PIN 3
PIN 7
PIN 7
HD-15 PIN 5
HD-15 PIN 6
HD-15 PIN 7
HD-15 PIN 8
HD-15 PIN 10
HD-15 PIN 13
HD-15 PIN 14
HD-15 PIN
SHell
Pin
Function
2
VIDeO 1 IN (BlACk jACkeT)
6
VIDeO 1 IN, GND
11
VIDeO 2 IN (GrAy jACkeT)
15
VIDeO 2 IN, GND
1
VGA, ANAlOG-reD
4
VGA, ANAlOG-GreeN
3
VGA, ANAlOG-BlUe
13
VGA, ANAlOG, GND
8
VGA, ANAlOG-reD, GND
8
VGA, ANAlOG-GreeN, GND
8
VGA, ANAlOG-BlUe, GND
13
VGA, SyNC-GND
7
VGA, H-SyNC
12
VGA, V-SyNC
9
VGA, OVerAll SHIelD
1
ページを印刷する