- ページ 9

船舶用GPSシステム Garmin GPSMAP 531 - GPS ReceiverのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 531 - GPS Receiver 12 ページ。 Gpsmap 400/500 series weather and xm satellite radio supplement
Garmin GPSMAP 531 - GPS Receiver にも：重要な安全情報 (4 ページ), リファレンス・マニュアル (2 ページ), ユーザーマニュアル (28 ページ)

ページを印刷する

Connecting Cables to the Chartplotter

Use the diagrams below to help identify the connectors on the back of your GPSMAP 400/500 series chartplotter. Every possible chartplotter

configuration is not represented in the diagrams, but every possible connector type is listed for identification purposes. Every connector on the

back of the chartplotter may not be used for all installations.

GPSMAP 421, 441, and 451

GPSMAP 420, 430, 431, 440, and 450

GPSMAP 521, 541, 551

Testing the Installation

To turn on your chartplotter for the first time, press and hold the

and the SeLect keys, follow the screens to configure your chartplotter.

Testing the Optional Transducer Installation

Because water is necessary to carry the sonar signal from the sounder, the transducer must be in the water to work properly. You cannot get a

depth or distance reading when the transducer is out of the water.

When you place your boat in the water, check for leaks around any screw holes that were added below the water line. Do not leave your boat in

the water for an extended period of time without checking for leaks.

GPSMAP 400/500 Series Installation Instructions

➋

➌

➊

➋

➌

➎

➊

GPSMAP 430x and 440x

➍

➊

GPSMAP 530, 535, 540, and 545

➋ ➊

GPSMAP 526, 536, 546, and 556

PoWeR key until the chartplotter beeps and turns on. Using the ROCKER

➊

Wiring harness

➋

NMEA 2000

➌

External GPS

antenna (sold

separately)

➍

Compatible XM

antenna with

audio adapter

(sold separately)

➎

Compatible XM

antenna (sold

separately)