- ページ 2

船舶用GPSシステム Garmin GPSMAP 535 - Marine GPS ReceiverのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 535 - Marine GPS Receiver 28 ページ。 Flush mount template
Garmin GPSMAP 535 - Marine GPS Receiver にも：取付説明書 (12 ページ), クイック・リファレンス・マニュアル (2 ページ), 適合宣言 (1 ページ), テンプレート (1 ページ)

ページを印刷する

Garmin GPSMAP 535 - Marine GPS Receiver 取扱説明書

3. Install the unit in the opening (see Figure 2):

•

Place the unit housing in the recently cut hole in the mounting surface.

•

Slide the tension mount brackets onto the hex bolts and secure them with the four wing nuts.

•

Tighten the four wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.

•

If you did not do so in step 2, connect the wiring harness to the unit, then slide the unit into the unit housing until it snaps in place.

Assembled unit and

flush mount hardware

NOTE: You must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna (if applicable), and transducer (if applicable)

per the installation instructions included with the unit.

Tension mount brackets

Figure 2

Wing nuts