- ページ 9

ツール alkitronic CLS 95のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。alkitronic CLS 95 12 ページ。 Compact torque multiplier

ページを印刷する

2.7

Finishing or interruption the work (even with

change of accessories)

• Interrupt the air pressure in the machine

• Disconnect the compressed air supply to the maintenance

unit or to the supply system

• By briefly switching on the machine, remove any residual air

• Decouple the compressed air hose on the machine

Beware of components exposed to high air pressure:

Unintentional operation of the alkitronic® torque

multiplier may result in injury or property damage.

When removing the compressed air hose from the

machine, always disconnect the air supply first. An

out of control compressed air hose can cause injury

or property damage.

In the event of prolonged periods without use, oil

must be supplied to the engine via the compressed

air inlet on the pistol grip. This prevents corrosion

damage to the motor lamella (see section 3.3 Main-

tenance and 4.1 Air lubrication).

Service

Do not use damaged alkitronic® torque multipli-

ers and accessories. Only use original alkitronic®

spare parts / accessories.

3.1

Changing from standard nut, standard connector

and DMA (CLD, CLS, CLS2)

• Interrupt compressed air supply - uncouple the com-

pressed air hose at the machine

• Place the alkitronic® CL on a flat surface

• Remove rubber ring (6) and locking pin (7) or locking

screw (8)

• Remove standard nut / connector (2) / (3) towards the

front (Fig. 7.1)

• Pull DMA (1) out of the gearing (4) towards the front (Fig. 7.1)

• Assembly is in reverse order

Pneumatic Torque Multiplier

Fig. 6

Disc

Handle

alkitronic® DMA

Torque reaction absorber

3.2

Changing the alkitronic® STA (Standard adapter)

and the support plunger for type RCL

Always insert the support pin and / or standard

adapter completely, otherwise the housing can be

severely damaged during operation.

Support plunger

Fig. 7.1

alkitronic® STABI

Standard connector

alkitronic® STACO

Standard nut

alkitronic®

STACO

Standard

nut

Support plunger

alkitronic® STA

Standard adapter