- ページ 8

船舶用GPSシステム Garmin GPSMAP 7212のPDF テクニカル・リファレンスをオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 7212 42 ページ。 Flush mount template
Garmin GPSMAP 7212 にも：オーナーズマニュアル (2 ページ), 取付説明書 (21 ページ), 適合宣言 (6 ページ), 補足マニュアル (24 ページ), テンプレートマニュアル (2 ページ)

NMEA 2000 Fundamentals

Linear Backbone Construction

Use the NMEA 2000 T-connectors to construct your NMEA 2000 backbone, and extend the backbone with appropriate lengths of backbone

cable if necessary. Use one T-connector per device. Use the sides of the T-connector to construct the backbone of the NMEA 2000 network, and

use the top of the T-connector to attach a NMEA 2000 device. By using only the sides of the T-connectors to construct the backbone, you create

a linear construction to your NMEA 2000 network. T-connectors can be separated by backbone cables or connected directly together.

Although the male and female connectors on the T-connectors and backbone cables will fit on all sides of a T-connector, it is very important to

use the top of the T-connector only to attach NMEA 2000 devices, not to attach other T-connectors or backbone cables.

To NMEA 2000 devices

and power

Female

terminator

Male

Backbone extension cable

terminator

Correct Linear Backbone Construction

To NMEA 2000 devices

and power

T-connector

installed incorrectly

Male

terminator

Male

Backbone extension cable

(also installed

terminator

incorrectly)

Incorrect Linear Backbone Construction

Technical Reference for Garmin NMEA 2000 Products