- ページ 5

船舶用GPSシステム Garmin GPSMAP 76SのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 76S 19 ページ。 Gpsmap 76 series
Garmin GPSMAP 76S にも：適合宣言 (1 ページ), 適合宣言 (1 ページ), 仕様書 (2 ページ)

ページを印刷する

Quick Start

Interface keys

The IN and OUT keys are used on the Map Page and the Plot Page. When

pressed, the IN key will decrease the map scale (Map Page) or decrease

the horizontal scale (Plot Page) allowing you to view a smaller area with

greater detail.

When pressed the OUT key will increase the map scale (Map Page) or the hori-

zontal scale (Plot Page) allowing you to view a larger area with less detail.

The NAV/MOB key is used to begin or stop navigation. If the NAV/MOB

key is pressed and held down, the GPS stores the current location (a man

overboard point) and gives you the opportunity to begin immediate navigation to

that point.

The PAGE key will cycle you through the six main display pages in

sequence. When held it toggles the compass on and off.

The POWER key is used to turn the unit on and off. To turn the unit

off press the POWER key and hold it. The POWER key is also used to

display the adjustment window for the backlight and contrast adjustment. To

activate the backlight/contrast adjustment window with the unit on, press and

release the POWER key.

The MENU key is used to display page option menus. If pressed twice,

the Main Menu will be displayed.

The QUIT key will cycle you through the ﬁ ve main display pages in

reverse sequence. The QUIT key will end an operation in progress and

display the previous page.

The ENTER key is used to activate a data ﬁ eld or conﬁ rm a selection. If

the ENTER key is pressed and held, the GPSMAP 76S will store the cur-

rent location and display the Mark Waypoint page.

The ROCKER key, located in the center of the keypad, is used to control

the Up/Down and Left/Right movement of the cursor on the display pages

and during data entry.