- ページ 11

食器洗い機 AEG 645のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG 645 24 ページ。 Dishwasher
AEG 645 にも：取扱説明書 (25 ページ), 取扱説明書 (40 ページ), 取扱説明書 (24 ページ)

ページを印刷する

Setting the water hardness - adding dishwasher salt

The salt you require is special salt suitable

for domestic dishwashers. On no account

should table salt, cooking salt, road salt or

processed sea salt be used, because they

contain substances adversely affecting the

water softener.

Important! Detergents and salt are very often

available in very similar looking packaging.

Take care that you DO NOT fill the salt con¬

tainer with detergent, IT RENDERS THE WATER

SOFTENER INEFFECTIVE. The salt container

filler neck is situated on the right hand side on

the bottom of the wash tub (fig, 2/B). To fill the

container - open the door, lift out the lower

basket, unscrew the cap marked $=5 and

place the funnel supplied with the machine

over the opening (fig. 5).

Before the first use only, pour 1.5 to 2 litres

(3-4 pints) of water into the salt container.

Then add the salt until it is visible at the top of

the container (capacity approx. 1.5 Kg). During

the filling process, some water is displaced.

Remove any spilled salt from the filler neck

and replace the cap firmly. Replace the lower

basket.

Important!

To prevent salt from entering the washing

cycle close the cap to the salt container firmly.

Cloudy glassware may result from salt getting

into the washing water. No salt residues must

be left on the bottom of the tub. To ensure

that all salt residues are removed, select a

rinse and hold programme or, a complete

wash programme if you have enough dirty

crockery, after the salt container has been

filled.

To replenish the salt container

Replenish the salt container when the lamp

above Symbol !=s on the control panel

(fig. 1/IV) is on.

Please note

For water hardness area 1 - see page 10, no

salt is required and symbol (=3 will light up

every time the machine is switched on. Please

ignore the light in this particular instance - it

does not affect the operation of the machine.

Filling the rinse aid container

Rinse aid is dispensed automatically during

the final hot rinse. It prevents water drops from

clinging to the crockery and gives the final

sparkle to the china and glassware.

Important!

Use only rinse aids suitable for domestic

dishwashers - we recommend Finish.

Never use normal washing up liquids. These

have high sudsing properties and are unsuit¬

able for dishwashers.

You will find the rinse aid container on the

inside of the door (fig. 2/E). Open the contain¬

er by turning the lid a quarter turn to the left

(fig. 7/arrow) and slowly pour rinse aid into

the filler neck up to the dotted line (fig. 8).

Replace the lid and close by turning it clock¬

wise. The container will take approx. 150cc,

which will last for approx. 50 programmes.

Wipe off any spilled rinse aid to prevent

excess foaming during the next wash cycle.

Rinse aid refill indicator

Replenish the rinse aid container when the ,

level indicator window (fig. 8) shows a dark

the container is full the window is darker in