- ページ 39

船舶用GPSシステム Garmin nuvi 500-SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin nuvi 500-Series 44 ページ。 Flush mount template
Garmin nuvi 500-Series にも：クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアル (28 ページ), オーナーズマニュアル (38 ページ), 重要なお知らせ (1 ページ), 取付説明書 (6 ページ), オーナーズマニュアル (50 ページ)

ページを印刷する

Shoreline Distance: Sets how close to the shore you want the

Auto Guidance line to be placed. The Auto Guidance line

may move if you change this setting while navigating. The

available values for this setting are relative, not absolute. To

ensure that the Auto Guidance line is placed the appropriate

distance from shore, you can assess the placement of the

Auto Guidance line using one or more familiar destinations

that require navigation through a narrow waterway

the Distance from

Shore).

Adjusting the Distance from Shore

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

NOTE: Auto Guidance is available with premium charts, in

some areas.

The Shoreline Distance setting indicates how close to the shore

you want the Auto Guidance line to be placed. The Auto

Guidance line may move if you change this setting while

navigating. The available values for the Shoreline Distance

setting are relative, not absolute. To ensure the Auto Guidance

line is placed the appropriate distance from shore, you can

assess the placement of the Auto Guidance line using one or

more familiar destinations that require navigation through a

narrow waterway.

Dock your vessel or drop the anchor.

Select Settings > Navigation > Auto Guidance >

Shoreline Distance > Normal.

Select a destination that you have navigated to previously.

Select Navigate To > Guide To.

Review the placement of the Auto Guidance line, and

determine whether the line safely avoids known obstacles

and the turns enable efficient travel.

Select an option:

• If the placement of the Auto Guidance line is satisfactory,

select Menu > Stop Navigation, and proceed to step 10.

• If the Auto Guidance line is too close to known obstacles,

select Settings > Navigation > Auto Guidance >

Shoreline Distance > Far.

• If the turns in the Auto Guidance line are too wide, select

Settings > Navigation > Auto Guidance > Shoreline

Distance > Near.

If you selected Near or Far in step 6, review the placement

of the Auto Guidance line, and determine whether the line

safely avoids known obstacles and the turns enable efficient

travel.

Auto Guidance maintains a wide clearance from obstacles in

open water, even if you set the Shoreline Distance setting to

Near or Nearest. As a result, the chartplotter may not

reposition the Auto Guidance line, unless the destination

selected requires navigation through a narrow waterway.

Select an option:

• If the placement of the Auto Guidance line is satisfactory,

select Menu > Stop Navigation, and proceed to step 10.

• If the Auto Guidance line is too close to known obstacles,

select Settings > Navigation > Auto Guidance >

Shoreline Distance > Farthest.

• If the turns in the Auto Guidance line are too wide, select

Settings > Navigation > Auto Guidance > Shoreline

Distance > Nearest.

If you selected Nearest or Farthest in step 8, review the

placement of the Auto Guidance line, and determine whether

Appendix

(Adjusting

CAUTION

the line safely avoids known obstacles and the turns enable

efficient travel.

Auto Guidance maintains a wide clearance from obstacles in

open water, even if you set the Shoreline Distance setting to

Near or Nearest. As a result, the chartplotter may not

reposition the Auto Guidance line, unless the destination

selected requires navigation through a narrow waterway.

Repeat steps 3 through 9 at least once more, using a

different destination each time, until you are familiar with the

functionality of the Shoreline Distance setting.

Other Vessel Settings

When your compatible chartplotter is connected to an AIS

device or VHF radio, you can set up how other vessels are

displayed on the chartplotter.

Select Settings > Other Vessels.

AIS: Enables and disables AIS signal reception.

DSC: Enables and disables digital selective calling (DSC).

AIS Alarm: Sets the collision alarm

Collision Alarm

and

Enabling AIS Transmission Test

Restoring the Original Chartplotter Factory

Settings

NOTE: This will delete all settings information you have

entered.

Select Settings > System > System Information > Factory

Settings.

Appendix

Registering Your Device

Help us better support you by completing our online registration

today.

• Go to http://my.garmin.com.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Cleaning the Screen

Cleaners containing ammonia will harm the anti-reflective

coating.

The device is coated with a special anti-reflective coating which

is very sensitive to skin oils, waxes, and abrasive cleaners.

Apply an eyeglass lens cleaner specified as safe for anti-

reflective coatings to the cloth.

Gently wipe the screen with a soft, clean, lint-free cloth.

Calibrating the Touchscreen

You can calibrate the screen if the screen is not properly

responding to the touches. The chartplotter touchscreen does

not normally require calibration.

Select Settings > System > Display > Calibrate

Touchscreen.

Follow the on-screen instructions.

Screenshots

You can capture a screenshot of any screen shown on your

chartplotter as a bitmap (.bmp) file. You can transfer the

screenshot to your computer.

Capturing Screenshots

Insert a memory card into the card slot.

(Setting the Safe-Zone

NOTICE

Alerts).