- ページ 20

食器洗い機 AEG COMFORTLIFT 9000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG COMFORTLIFT 9000 24 ページ。
AEG COMFORTLIFT 9000 にも：ユーザーマニュアル (28 ページ)

ページを印刷する

www.aeg.com

Problem and alarm code

The program lasts too long.

The remaining time in the

display increases and skips

nearly to the end of program

time.

Small leak from the appli-

ance door.

The appliance door is diffi-

cult to close.

Rattling/knocking sounds

from inside the appliance.

The appliance trips the cir-

cuit-beaker.

Refer to "Before first use",

"Daily use", or "Hints and

tips" for other possible

causes.

Once you have checked the appliance,

deactivate and activate the appliance. If

12.1 The washing and drying results are not satisfactory

Problem

Poor washing results.

Possible cause and solution

• Select the TimeSaver option to shorten the program

time.

• If the delayed start option is set, cancel the delay setting

or wait for the end of the countdown.

• This is not a defect. The appliance is working correctly.

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

Possible cause and solution

• Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".