- ページ 23

舶用機器 Garmin Cessna Caravan G1000のPDF パイロット・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin Cessna Caravan G1000 25 ページ。 Integrated flight deck
Garmin Cessna Caravan G1000 にも：パイロット・マニュアル (16 ページ), パイロット・マニュアル (6 ページ), パイロット・マニュアル (32 ページ), パイロット・マニュアル (34 ページ), パイロット・マニュアル (21 ページ), 飛行機フライトマニュアル補足 (33 ページ), パイロット・マニュアル (22 ページ)

To auto-tune a NAV frequency if the desired

approach is already loaded:

Press the PROC key to open the Procedures

window.

Turn the large FMS knob to highlight the

'ACTIVATE APPROACH' menu option and

press the ENT key. The approach primary NAV

frequency becomes automatically loaded into

the standby ﬁeld of the selected NAV radio.

NOTE: If the system is in GPS mode when a

VOR/ILS approach is loaded or activated, the

approach primary NAV frequency is automatically

loaded into the active ﬁeld of NAV1.

NOTE: Before loading or activating an approach,

the associated primary NAV frequency may be

loaded into the NAV tuning box by highlighting

the frequency in the Select Approach window via

the FMS knob, then by pressing the ENT key.

NOTE: Automatic loading of the NAV frequency

also occurs upon vector-to-ﬁnal activation, if the

NAV frequency is not already loaded into either

the standby or the active ﬁeld of the selected

NAV radio.

NOTE: Approach activation can also be performed

via the MENU key when the Flight Plan window

is open.

190-00445-00 Rev. A

Garmin G1000 VHF NAV/COM Pilot's Guide for Mooney M20M & M20R

OPERATION – AUTO-TUNING

Figure 4.4.12 Activating an Approach

NOTE: When a VOR/ILS approach has been acti-

vated in GPS mode, if the ILS CDI Capture option

on the AUX 4 Page is set to AUTO, the system

automatically switches to NAV mode as the ﬁnal

approach course is intercepted (if within 15 nm

from the FAF). Please see the Multi Function

Display Pilot's Guide for details on this feature.

4-21