- ページ 41

舶用機器 Garmin Colorado 400cのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin Colorado 400c 48 ページ。 Oregon series
Garmin Colorado 400c にも：オーナーズマニュアル (40 ページ), クイック・リファレンス・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), オーナーズマニュアル (48 ページ), 重要な安全情報 (48 ページ), オーナーズマニュアル (26 ページ), (デンマーク語）マニュアル (48 ページ)

Connecting Your Colorado to a

Computer

You can connect the Colorado to your computer using

the supplied USB cable.

NOTE: Install the supplied Trip and Waypoint

Manager software on your computer before

connecting the USB cable. Follow the instructions

provided with the software.

To connect your Colorado to your

computer:

1. Lift the weather cap on the top of the Colorado

and insert the smaller connector on the USB

cable into the USB mini-B jack.

2. Connect the remaining cable end to an empty

USB port on your computer.

Information About USB Drivers

The USB drivers are automatically installed when you

install the Trip and Waypoint Manager software that

came with your Colorado. When you initially connect

the Colorado to a USB port, your computer might

prompt you to locate the destination of the drivers for

Colorado

Series Owner's Manual

™

the device. You only need to install the drivers once.

After the drivers are installed, your computer always

detects your Colorado when it is connected. USB

drivers might be updated periodically. You can find

updates at www.garmin.com.

Transferring Tracks, Routes, or

Waypoints from the Colorado to Your

Computer

Tracks, routes, and waypoints saved on your Colorado

can be saved and viewed in the Trip and Waypoint

Manager software.

To transfer tracks, routes, or waypoints:

1. Ensure that Trip and Waypoint Manager is

installed on your computer and open.

2. Ensure that the Colorado is connected to the

computer with the USB cable and powered on.

3. Click Receive from Device on the Transfer

menu or click the Receive from Device icon at

the top of the screen.

ppendIx