- ページ 14

舶用機器 Garmin FUSION Apollo MS-WB670のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin FUSION Apollo MS-WB670 19 ページ。 Marine hideaway stereo
Garmin FUSION Apollo MS-WB670 にも：オーナーズマニュアル (44 ページ)

ページを印刷する

Network Configuration

Setting the Stereo as the DHCP Server

If you connected more than two network devices together directly or using a network switch or wireless access

point and did not install a router, you should configure only one Fusion PartyBus stereo to be a DHCP server.

1 Select

> SETTINGS.

2 Select the name of the stereo.

3 Select NETWORK > STATIC IP > SAVE.

4 Select ADVANCED > DHCP SERVER > DHCP ENABLED > SAVE.

Configuring the Stereo for use with a Garmin

You can connect this stereo to a Garmin Marine Network in order to view and control the stereo using a

compatible Garmin chartplotter.

NOTE: When you configure the stereo for use with a Garmin Marine Network, you are limited to using only

Garmin and Fusion devices. You may not be able to use third-party routers, storage devices, or other network

products with this stereo directly.

When the stereo is connected to a Garmin Marine Network, you can connect a smartphone to a wireless access

point on a connected Garmin chartplotter and use the Fusion-Link

1 Select

> SETTINGS.

2 Select the name of the stereo.

3 Select NETWORK > GARMIN MARINE NETWORK.

Resetting Network Settings

You can reset all network settings for this stereo to the factory default values.

1 Select

> SETTINGS.

2 Select NETWORK > ADVANCED > RESET > YES.

Advanced Network Configuration

You can perform advanced networking tasks on a Fusion PartyBus device, such as defining DHCP ranges and

setting static IP addresses. See the owner's manual for more information.

Network Troubleshooting

If you cannot see or connect to Fusion PartyBus devices on the network, check the following:

• Verify that only one device, either a stereo or a router, is configured as a DHCP server.

• Verify that all Fusion PartyBus devices, network switches, routers, and wireless access points are connected

to the network and turned on.

• Verify that wireless Fusion PartyBus devices are connected to a wireless router or wireless access point on

the network.

NOTE: Wired connections are more reliable than wireless connections. If possible, you should connect

devices to the network using an Ethernet cable.

• You may experience wireless interference if there are many nearby wireless access points. Change the

channel on your router or wireless access point to test for and correct interference.

• Connecting a Bluetooth

wireless performance. Disconnect Bluetooth devices to test for and correct interference.

• If you configured static IP addresses, verify that every device has a unique IP address, that the first three

sets of numbers in the IP addresses match, and that the subnet masks on every device are identical.

• If you have made configuration changes that might be causing networking issues, reset all network settings

to the factory default values.

Marine Network

device to a stereo configured as a wireless access point or client may reduce

™

app to control the stereo.

Apollo MS-WB670 Installation Instructions