- ページ 12
食器洗い機 AEG F55402VI0PのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG F55402VI0P 24 ページ。
AEG F55402VI0P にも： ユーザーマニュアル (16 ページ)
ページを印刷する
12
www.aeg.com
8.1 Using the detergent
A
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the
compartment (A) .
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. If you use detergent tablets, put the
tablet in the compartment (A).
5. Close the lid. Make sure that the
release button locks into position.
8.2 Setting and starting a
programme
Setting mode
The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation, all the programme
indicators come on.
If the control panel shows other
conditions, press and hold
simultaneously
until the appliance is in setting mode.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in setting mode.
3. Set the programme.
• The related programme indicator
comes on.
B
30
20
+
-
C
and
• The programme duration flashes
in the display.
4. Close the appliance door. The
programme starts.
• If you open the door, the display
shows the programme duration
that decreases with steps of 1
minute.
Starting a programme with
delay start
1. Set a programme.
2. Press
again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
The delay indicator comes on.
3. Close the appliance door to start the
countdown.
While a countdown is running it is
possible to increase the delay time but
not to change the selection of the
programme and options.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. It may
affect the energy consumption and the
programme duration. When you close
the door, the appliance continues from
the point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme will end.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you
have to set the programme and options
again.
Press and hold simultaneously
and
appliance is in programme selection
mode.
until the