舶用機器 Garmin GMR 18 HD3のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GMR 18 HD3 15 ページ。

GMR

18 HD3 AND 18/24 XHD3

™

INSTALLATION INSTRUCTIONS

Important Safety Information

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other

important information.

Failure to install this device according to these instructions could result in personal injury, damage to the vessel

or device, or poor product performance.

The radar transmits electromagnetic energy. To avoid possible personal injury, damage to the vessel or device,

or poor product performance, ensure that the radar is installed according to the recommendations in these

instructions and that all personnel are clear of the path of the radar beam before transmitting. When properly

installed and operated, the use of this radar conforms to the requirements of ANSI/IEEE C95.1-1992 Standard

for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields.

To avoid possible personal injury, do not look directly at the antenna at close range when the radar is

transmitting. Eyes are the most sensitive part of the body to electromagnetic energy.

When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or

product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product

specifications. Connecting the power cable without the appropriate fuse in place voids the product warranty.

CAUTION

For the best possible performance and to avoid potential injury, damage to the device, or damage to your vessel,

installation by a qualified marine installer is recommended.

Opening the device may result in personal injury and/or damage to the device. This device contains no user-

serviceable parts, and should be opened only by a Garmin

authorized service technician. Any damage resulting

from opening the unit by anyone other than a Garmin authorized service technician will not be covered by the

Garmin warranty.

This device should be used only as a navigational aid. Using the device for any purpose requiring precise

measurement or direction, distance, location, or topography may result in personal injury or damage to the

vessel.

To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,

cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.

Software Update

You must update the Garmin chartplotter software when you install this device. For instructions on updating the

software, see your chartplotter owner's manual at support.garmin.com.

June 2023

GUID-0436BE40-091E-49FE-9005-E50CFCABE751 v1