- ページ 11

舶用機器 Garmin GPSMAP 5015のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 5015 25 ページ。 Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Garmin GPSMAP 5015 にも：クイック・リファレンス・マニュアル (2 ページ), オーナーズマニュアル (2 ページ), 取付説明書 (25 ページ), クイック・リファレンス・マニュアル (2 ページ), 安全性と製品情報 (48 ページ), テクニカル・リファレンス (42 ページ), 製品情報 (48 ページ), 適合宣言 (1 ページ), フラッシュマウントテンプレート (2 ページ), 補足マニュアル (24 ページ)

Creating a Basic nMEA 2000 network

If your boat does not already have an existing NMEA 2000 network installed, you will need to create a basic NMEA 2000 network. For more

information on NMEA 2000, visit www.garmin.com.

to create a basic nMEA 2000 network

1. Connect the three included T-connectors together by their sides.

2. Connect the appropriate terminators to each end of the combined T-connectors.

3. Wire the included NMEA 2000 power cable to a 12 Vdc power source through a switch. Connect to the ignition switch for the boat if possible.

4. Connect the NMEA 2000 power cable to the top of one of the T-connectors.

5. Route and connect the included NMEA 2000 drop cables from the GPS 17x and from the GPSMAP 4000/5000 series chartplotter to the tops

of the other T-connectors.

NOTES:

• The diagram shows only the NMEA 2000 data connection to the GPSMAP 4000/5000 series chartplotter. The chartplotter must also be

connected to power or it will not function. See

• One GPS antenna will provide position data for every device on the NMEA 2000 network. Do not connect multiple GPS antennas if you are

using multiple chartplotters.

GPSMAP 4000/5000 Series Installation Instructions

GPSMAP 4000/5000

series chartplotter

Ignition or

in-line switch

Power cable

Fuse

12 Vdc battery

Female

terminator

Creating a Basic nMEA 2000 network

page

GPS 17x

antenna

Drop cables

terminator

T-connectors

Male