- ページ 15

食器洗い機 AEG FAVORIT 34030 VIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG FAVORIT 34030 VI 20 ページ。 Dishwasher
AEG FAVORIT 34030 VI にも：ユーザーマニュアル (24 ページ), ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ)

ページを印刷する

After the checks are completed, activate

the appliance. The programme contin-

ues from the point of interruption.

If the problem occurs again, contact the

Service.

9.1 The washing results and drying results are not satisfactory

Problem

The dishes are not

clean.

Limescale particles

on the dishes.

Whitish streaks and

stains or bluish lay-

ers on glasses and

dishes.

Possible cause

The filters are clogged.

The filters are not correctly

assembled and installed.

The spray arms are clog-

ged.

The programme was not

applicable for the type of

load and soil.

Incorrect position of the

items in the baskets. Water

could not wash all items.

The spray arms could not

turn freely.

The quantity of detergent

was not sufficient.

There was no detergent in

the detergent dispenser.

The salt container is emp-

ty.

The set level of the water

softener is incorrect.

The cap of the salt contain-

er is loose.

The released quantity of

rinse aid is too much.

If other alarm codes show, contact the

Service.

Possible solution

Clean the filters.

Make sure that the filters

are correctly assembled and

installed.

Remove remaining soil with

a thin pointed object.

Make sure that the pro-

gramme is applicable for

the type of load and soil.

Make sure that the position

of the items in the baskets is

correct and that the water

can easily wash all items.

Make sure that the position

of the items in the baskets is

correct and does not cause

the blockage of the spray

arms.

Make sure that you add the

correct quantity of deter-

gent in the dispenser be-

fore you start a programme.

Make sure that you add de-

tergent in the dispenser be-

fore you start a programme.

Make sure that there is dish-

washer salt in the salt con-

tainer.

Make sure that the set level

of the water softener agrees

with the water hardness in

your area.

Tighten the cap.

Decrease the released

quantity of rinse aid .

ENGLISH