- ページ 8

舶用機器 Garmin GPSMAP 7215のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 7215 21 ページ。 Flush mount template
Garmin GPSMAP 7215 にも：オーナーズマニュアル (2 ページ), テクニカル・リファレンス (42 ページ), 適合宣言 (6 ページ), 補足マニュアル (24 ページ), テンプレートマニュアル (2 ページ)

ページを印刷する

Installing the GPSMAP 6000/7000 Series Chartplotter and the GPS 17x Antenna NMEA

2000 Network Connections

The GPSMAP 6000/7000 series chartplotter is packaged with the necessary NMEA 2000 connectors and cable to either connect a GPSMAP

6000/7000 series chartplotter and a GPS 17x antenna to your existing NMEA 2000 network, or to build a basic NMEA 2000 network. For more

information on NMEA 2000, visit www.garmin.com.

If you are unfamiliar with NMEA 2000, be sure to read the "NMEA 2000 Network Fundamentals" chapter of the Technical Reference for

Garmin NMEA 2000 Products on the included CD or click on the "Manuals" hyperlink on the product page for your chartplotter at

garmin.com. For example, www.garmin.com/products/GPSMAP7212/.

Connecting to an Existing NMEA 2000 Network

If your boat already has a NMEA 2000 network installed, use the included T-connectors and drop cable to connect a GPSMAP 6000/7000 series

chartplotter and a GPS 17x antenna to the existing network.

If you have an existing NMEA 2000 network on your boat, it should already be connected to power. Do not connect the included NMEA 2000

power cable to an existing NMEA 2000 network.

to connect a GPSMAP 6000/7000 series chartplotter and a GPS 17x to your existing NMEA 2000 network:

1. Identify where you want to connect the GPSMAP

6000/7000 series chartplotter and the GPS 17x to your

existing NMEA 2000 backbone.

2. Disconnect one side of a NMEA 2000 T-connector from

the backbone nearest to the location where you want to

connect the chartplotter.

To extend the NMEA 2000 backbone (if necessary),

connect an appropriate NMEA 2000 backbone extension

cable (not included) to the side of the T-connector you

disconnected.

3. Connect an included T-connector to the NMEA 2000

backbone (for the chartplotter).

4. Route an included drop cable to the chartplotter and

to the top of the T-connector you added to your NMEA

2000 network.

If the included drop cable is not long enough, you can

add a drop cable extension up to 13 ft. (4 m). If more

cable is needed, add an extension to your NMEA 2000

backbone, based on the NMEA 2000 guidelines.

5. Disconnect one side of a NMEA 2000 T-connector from

the backbone nearest to the location where you want to

connect the GPS 17x antenna.

To extend the NMEA 2000 backbone (if needed),

connect an appropriate NMEA 2000 backbone extension

cable (not included) to the side of the T-connector you

disconnected.

6. Connect an included T-connector in the NMEA 2000

backbone (for the GPS 17x antenna).

7. Route an included drop cable from the GPS 17x antenna to the top of the T-connector you added to your NMEA 2000 network.

If the included drop cable is not long enough, you can add a drop cable extension up to 13 ft. (4 m). If more cable is needed, add an

extension to your NMEA 2000 backbone, based on the NMEA 2000 guidelines.

NotES:

• The diagram on page 8 shows only the NMEA 2000 data connection to a GPSMAP 6000/7000 series chartplotter. The chartplotter must

also be connected to power or it will not function.

• One GPS antenna will provide position data for every device on the NMEA 2000 network. Do not connect multiple GPS antennas if you

are using multiple chartplotters.

Notice

GPSMAP 6000/7000

series chartplotter

NMEA 2000

device

(not included)

Existing NMEA 2000 network

Connecting a GPSMAP 6000/7000 Series Chartplotter and a GPS 17x

Antenna to an Existing NMEA 2000 Network

GPS 17x

antenna

Drop cables

(included)

T-connectors

(included)

(not included)

GPSMAP 6000/7000 Series Installation Instructions