- ページ 31

食器洗い機 AEG FAVORIT 40310のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG FAVORIT 40310 40 ページ。 Electrolux group. user instructions dishwasher favorit 40260 i

Connecting the Dishwasher

The dishwasher is fitted with safety devices that prevent the wash

water returning into the drinking water system and comply with the

applicable plumbing regulations.

• The dishwasher must be connected to a cold water supply.

• The dishwasher must not be connected to open hot water appliances

or instantaneous water heaters.

Lowest permitted water pressure:

1 bar (=10 N/cm

Highest permitted water pressure:

10 bar (=100 N/cm

The water inlet hose must not be kinked, crushed or entangled when it

is being connected up.

Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet

hose to a tap with an external thread (¾ inch). Tighten the threaded

hose fitting hand tight only.

• In order that access to the tap in the kitchen is not limited by the use

of the dishwasher, we recommend the installation of an additional

tap, or fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose than that supplied, VDE

approved complete hose sets are to be used. These are available from

your local Service Force Centre.

• Do not use, for connection, old hoses which have been used for

another appliance.

=100 kPa)

=1 MPa)

Installation and Connection Instructions

Consult your installer if the water pres-

sure is less than 1 bar.

In the case of a water pressure greater

than 10 bar, a pressure reduction valve

must be used (available from your

dealer).