- ページ 7
舶用機器 Garmin GSD20 SounderのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin GSD20 Sounder 12 ページ。 Sounder module
Garmin GSD20 Sounder にも： 取付説明書 (12 ページ), 適合宣言 (1 ページ), 適合宣言 (1 ページ), 特徴 (2 ページ)
ページを印刷する
BASIC WIRING FOR GARMIN GSD 20 TO SINGLE GPSMAP 2006/2010
GARMIN
WIRE
COLOR
GPSMAP 2006/2010
(SEE NOTE 3)
ACCESSORY ON
ORANGE
POWER IN
RED
ALARM
YELLOW
GROUND
BLACK
PORT 3 OUT
WHITE/BLUE
PORT 3 IN WHITE/BROWN
NOTES:
1. ALL WIRES 24 AWG OR LARGER UNLESS OTHERWISE NOTED. FOR RUNS OVER
30' (9.1 m), USE 4-CONDUCTOR, SHIELDED 24 AWG WIRING.
2. THE ALARM OUTPUT CAN BE USED TO DRIVE A LAMP, HORN, OR BOTH.
MAXIMUM CURRENT IS 100 MILLIAMPS. A SWITCH OR RELAY CAN BE USED
TO SELECT BETWEEN VISUAL AND AUDIBLE ALERTS, IF REQUIRED.
3. REFER TO 2006/2010 INSTALLATION INSTRUCTIONS FOR WIRING THE
GPS 17 SENSOR AND OTHER DEVICES.
4. FOR RUNS OVER 30' (9.1 m), THE DRAIN WIRE MUST BE CONNECTED TO THE
SHIELDING OF THE EXTENSION RUN. DO NOT TERMINATE THE END OF THE
SHIELD DRAIN WIRE.
5. IN ORDER TO UPDATE THE GSD 20 SOFTWARE, THE 2006/2010 MUST BE
CONNECTED TO PORT A OF THE GSD 20.
BARE DRAIN WIRE - N/C DO NOT TERMINATE
5 A
18 AWG
+
SHIP'S BATTERY
10-35 VOLTS
ALARM
SEE NOTE 2
-
18 AWG
Installation
WIRE
COLOR
BARE
SEE NOTE 4
ORANGE
2 A
RED
BLACK
WHITE/BLUE
WHITE/BROWN
WHITE/RED
WHITE/BLACK
Wiring
GARMIN GSD 20
SOUNDER MODULE
SHIELD DRAIN
ON
POWER IN
GROUND
PORT A IN
PORT A OUT
PORT B IN
PORT B OUT
5