- ページ 11
舶用機器 Garmin STRIKER PLUS 7のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin STRIKER PLUS 7 16 ページ。 Compass safe distance
Garmin STRIKER PLUS 7 にも： クイック・スタート・マニュアル (8 ページ), クイック・スタート・マニュアル (2 ページ)
ページを印刷する
2
Select an option:
• To create the waypoint by entering position coordinates,
select Enter Coordinates, and enter the coordinates.
• To create the waypoint using a chart, select Use Chart,
select the location, and select .
Marking and Navigating to a Man Overboard Location
From any screen, select
The fishfinder sets a direct course back to the location.
Measuring Distance on the Map
You can measure the distance between your location and
another location.
1
Pan the map.
2
Select
> Measure Distance.
The distance between the locations appears in the upper-left
corner of the screen.
3
If necessary, select
to move the pin and measue the
distance to another location.
Viewing a List of all Waypoints
Select User Data > Waypoints.
Editing a Saved Waypoint
1
Select User Data > Waypoints.
2
Select a waypoint.
3
Select Edit Waypoint.
4
Select an option:
• To add a name, select Name, and enter a name.
• To change the symbol, select Symbol.
• To change the depth, select Depth.
• To change the water temperature, select Water Temp..
• To change the comment, select Comment.
• To move the position of the waypoint, select Position.
Deleting a Waypoint or an MOB
1
Select User Data > Waypoints.
2
Select a waypoint or an MOB.
3
Select Delete.
Deleting All Waypoints
Select User Data > Manage Data > Clear User Data >
Waypoints > All.
Routes
A route is a sequence of waypoints or locations that leads you to
your final destination.
Creating and Navigating a Route Using the Map
The starting point can be your present location or another
location on the map.
1
Select User Data > Routes > New > Route Using Chart.
2
Pan the map to select the starting location of the route.
3
Select
to add a turn to the route.
4
Repeat to add all of the turns in the route.
5
Select
> Navigate To.
6
Select an option.
Creating and Saving a Route
This procedure saves the route and all the waypoints in it. The
starting point can be your present location or another location.
1
Select User Data > Routes > New > Use Chart.
2
Select the starting location of the route.
3
Follow the onscreen instructions to add a turn.
Navigation with the STRIKER Plus
> Man Overboard > Yes.
4
If necessary, repeat step 3 to add more turns.
5
Select the final destination.
Viewing a List of Routes
Select User Data > Routes.
Editing a Saved Route
You can change the name of a route or change the turns the
route contains.
1
Select User Data > Routes.
2
Select a route.
3
Select Edit Route.
4
Select an option:
• To change the name, select Name, and enter the name.
• To select a waypoint from the turn list, select Edit Turns >
Use Turn List, and select a waypoint from the list.
• To select a turn using the chart, select Edit Turns > Use
Chart, and select a location on the chart.
Browsing for and Navigating a Saved Route
Before you can browse a list of routes and navigate to one of
them, you must create and save at least one route.
1
Select User Data > Routes.
2
Select a route.
3
Select Navigate To.
4
Select an option:
• To navigate the route from the starting point used when
the route was created, select Forward.
• To navigate the route from the destination point used
when the route was created, select Backward.
A magenta line appears. In the center of the magenta line is
a thinner purple line that represents the corrected course
from your present location to the destination. The corrected
course is dynamic, and it moves with your boat when you are
off course.
5
Review the course indicated by the magenta line.
6
Follow the magenta line along each leg in the route, steering
to avoid land, shallow water, and other obstacles.
7
If you are off course, follow the purple line (corrected course)
to go to your destination, or steer back to the magenta line
(direct course).
Browsing for and Navigating Parallel to a Saved
Route
Before you can browse a list of routes and navigate to one of
them, you must create and save at least one route.
1
Select User Data > Routes.
2
Select a route.
3
Select Navigate To.
4
Select Offset to navigate parallel to the route, offset from it
by a specific distance.
5
Indicate how to navigate the route:
• To navigate the route from the starting point used when
the route was created, to the left of the original route,
select Forward - Port.
• To navigate the route from the starting point used when
the route was created, to the right of the original route,
select Forward - Starboard.
• To navigate the route from the destination point used
when the route was created, to the left of the original
route, select Backward - Port.
• To navigate the route from the destination point used
when the route was created, to the right of the original
route, select Backward - Starboard.
9