- ページ 14

舶用機器 Garmin STRIKER PLUS 7のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin STRIKER PLUS 7 16 ページ。 Compass safe distance
Garmin STRIKER PLUS 7 にも：クイック・スタート・マニュアル (8 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Shallow Water: Sounds when the water depth is shallower than

the specified depth.

Deep Water: Sounds when the water depth is deeper than the

specified depth.

Water Temp.: Sounds when the water temperature varies more

than ± 2°F (± 1.1°C). Alarm settings are saved when the

device is turned off.

NOTE: You must connect the device to a temperature-

capable transducer to use this alarm.

Fish: Sets an alarm to sound when the device detects a

suspended target.

•

sets the alarm to sound when fish of all sizes are

detected.

•

sets the alarm to sound only when medium or large

fish are detected.

•

sets the alarm to sound only when large fish are

detected.

Unit Settings

Select Settings > Units.

System Units: Sets the unit format for the device.

Variance: Sets the magnetic declination, the angle between

magnetic north and true north, for your present location.

North Reference: Sets the direction references used in

calculating heading information. True sets geographic north

as the north reference. Grid sets grid north as the north

reference (000º). Magnetic sets the magnetic north as the

north reference.

Position Format: Sets the position format in which a given

location reading appears. Do not change this setting unless

you are using a map or chart that specifies a different

position format.

Map Datum: Sets the coordinate system on which the map is

structured. Do not change this setting unless you are using a

map or chart that specifies a different map datum.

Time Format: Sets a 12-hour, 24-hour, or UTC time format.

Time Zone: Sets the time zone.

Daylight Savings Time: Sets daylight savings time to Off or On.

Navigation Settings

NOTE: Some settings and options require additional hardware.

Select Settings > Navigation.

Route Labels: Sets the type of labels shown with route turns on

the map.

Turn Transition Activ.: Sets the turn transition to be calculated

based on time or distance.

Turn Transition Time: Sets how many minutes before the turn

that you transition to it as the next leg, when Time is selected

for the Turn Transition Activ. setting.

Turn Transition Dist.: Sets how far before the turn that you

transition to it as the next leg, when Distance is selected for

the Turn Transition Activ. setting.

Route Start: Selects a starting point for route navigation. You

can select Boat to start navigation from the current vessel

location, or Waypoints to start from the first waypoint on the

route.

Restoring the Factory Default Settings

NOTE: This deletes all settings information you have entered,

including all Garmin Quickdraw Contours you have generated.

Select Settings > System > System Information > Factory

Settings > Yes.

Sharing and Managing User Data

You can share data if two compatible devices are connected

using the blue and brown wires on the power cable or using the

User Data Sharing Cable

(Connecting to a Garmin Device to

Share User Data, page

12).

Connecting to a Garmin Device to Share

User Data

You can connect the STRIKER Plus device to a compatible

Garmin device to share user data, such as waypoints. If the

devices are mounted near each other, you can connect the blue

and brown wires. If the devices are mounted too far apart for the

wires to reach, you can connect the devices using a User Data

Sharing Cable (010-12234-06).

Make sure both devices are connected to the same ground.

Complete an action:

• If the devices are mounted near each other, connect the

blue wire from the first device to the brown wire of the

second, and connect the brown wire from the first device

to the blue wire of the second.

• If the devices are not mounted near each other, obtain a

User Data Sharing Cable (010-12234-06), and connect

the devices following the instructions included with the

cable

(User Data Sharing Cable Wiring Diagram,

page

12).

On both devices, select User Data > Manage Data > User

Data Sharing.

User data is shared between the connected devices. If you

select Clear User Data, data is removed from both connected

devices.

User Data Sharing Cable Wiring Diagram

Item

Wire Function

Data

Ground

Data

Clearing Saved Data

You can remove saved user data from the device memory. User

data includes waypoints, routes, and tracks.

Select User Data > Manage Data > Clear User Data.

Select an option.

If you select All, all the data you have saved will be removed,

except Garmin Quickdraw contours data.

If you are connected to another device and User Data

Sharing is enabled, data is removed from all connected

devices.

Wire Color

Blue

Brown

Black

Green

White

NOTICE

Sharing and Managing User Data