- ページ 8
食器洗い機 AEG FAVORIT 42300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AEG FAVORIT 42300 36 ページ。 Electrolux operating instructions dishwasher favorit 42300
ページを印刷するBefore use
Before using your dishwasher for the first time
1. Ensure that the electrical and water connections comply with the installation
instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour 1 litre of water inside the salt container and then fill with salt.
5. Fill the rinse-aid dispenser.
6. Run a "Rinse and Hold" programme.
Setting the water hardness range
The dishwasher is equipped with a water softener designed to remove minerals and
salts from the water supply, which would have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, German, French degrees and PPM
(parts per Million).
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener should be adjusted.
°dH
(german degrees)
0 - 4
5 - 11
12 - 22
23 - 34
35 - 45
46 - 50
If your water hardness is level 0 it is already soft and therefore there is
no need to use salt. In this case adjust the water softener on level 1
without using salt.
The salt indicator light on the control panel will always remain
illuminated when the machine is switched on.
8
Water hardness
°TH
(french degrees)
(parts per million)
0 - 8
9 - 20
21 - 40
41 - 60
61 - 80
81 - 90
Level
PPM
0 - 80
81 - 200
201 - 400
401 - 600
601 - 800
801 - 900
Use of salt
0
NO
1
YES
2
YES
3
YES
4
YES
5
YES