ページを印刷する
1
Select PA > HAILER.
Sounds received through the horn are heard through the
radio speaker.
2
Hold PTT.
3
Select an option:
• To make an announcement, speak into the handset.
• To adjust the volume of the hailer broadcast, turn the
SELECT dial on the radio, or select
handset.
4
Release PTT to stop broadcasting and listen for broadcasts
from other connected radios on the ship.
Foghorn
NOTE: Foghorn functionality is not available on all VHF radio
models.
Before you can use the foghorn, you must provide and install a
hailer horn (optional) on the deck or tower of your boat. For
more information, see the Installation Instructions.
The foghorn is part of the public address system of your radio.
You can sound the foghorn through a hailer horn or an external
speaker. Your radio can sound the horn automatically using
standard patterns, or you can sound the horn manually. When
you manually operate the foghorn, sounds received through the
horn can be heard through the radio speaker between
soundings.
Sounding the Foghorn Automatically
1
Select PA > FOG > AUTO.
2
Select a foghorn-type option.
The radio alternates between sounding the pattern of tones
or rings and receiving radio broadcasts.
3
Turn the SELECT dial to adjust the volume of the horn
(optional).
Sounding the Foghorn Manually
NOTE: When you sound the horn manually, the radio does not
receive broadcasts between horn soundings.
1
Select PA > FOG > MANUAL.
Sounds are received through the horn and heard through the
radio speaker.
2
Hold PTT.
NOTE: The horn stops sounding when you release PTT.
3
Turn the SELECT dial to adjust the volume of the horn
(optional).
Adjusting the Sound Frequency of the Foghorn
You can increase or decrease the sound frequency of the
foghorn. The pitch of the tone rises with an increase in
frequency, and falls with a decrease in frequency. The minimum
setting is 200 Hz, and the maximum setting is 850 Hz. The
default setting is 350 Hz. Regulations dictate the correct
frequency of foghorns, which correlate with the size of your
vessel.
1
Select MENU > SYSTEM > FOG FREQUENCY.
2
Turn the SELECT dial to adjust the frequency in 50 Hz
increments.
3
Select ACCEPT.
Entering Text
You may need to enter a name, a number, or other text on the
radio.
1
From a number or text field, turn the SELECT dial to change
the number, letter, or character.
4
2
3
4
NOAA
or
on the
NOTE: This feature is not available on all radio models.
NOAA weather broadcasts on the weather (WX) channels are
available only in the USA and certain regions in Canada.
Compatible radio models are programmed with 10 WX channels
to monitor weather broadcasts from the National Oceanic and
Atmospheric Organization (NOAA). WX channels are listen-only
channels that broadcast in a continuous loop and are updated
regularly. NOAA broadcasting information is regional and
relevant to your broadcast area.
Tuning Weather Broadcasts
1
2
Enabling and Disabling Weather Alerts
You can enable weather (WX) alerts to sound when you are
using standard radio channels.
1
2
Digital Selective Calling
NOTE: Before you can use DSC capabilities, you must enter a
Mobile Marine Safety Identity (MMSI) number
MMSI Number, page
DSC radio, like a telephone number.
Digital Selective Calling (DSC) is a key component of the Global
Maritime Distress and Safety System (GMDSS). DSC enables
VHF radios to place and receive digital calls directly with other
vessels and shore stations, including the USA and Canadian
Coast Guards. Your radio includes full Class-D DSC capabilities.
If you have a GPS device connected to the transceiver, your
latitude, longitude, and the current time are transmitted when
you send a distress call or other type of DSC call. If you enter
your position information manually, your latitude, longitude, and
time of entry are transmitted with the call. Transmitting your
location automatically speeds help in an emergency situation.
Channel 70 is reserved exclusively for DSC calls, and your
device uses a dedicated receiver to maintain a constant watch
on Channel 70. You do not need to change the channel to make
a DSC call. Your device changes to Channel 70 automatically to
transmit a DSC call. Your radio sends the DSC data over
Channel 70 in less than one second, and then tunes to an
appropriate channel for voice communications.
appears on the device screen when you have an incoming or
missed DSC call.
NOTE: The device disables DSC automatically when you turn
on ATIS
page
Press the SELECT dial to accept the number, letter, or
character and move to the next space in the sequence.
Repeat this process for each number, letter, or character.
NOTE: You can select
the sequence.
Select ACCEPT.
Weather Broadcasts and Alerts
®
From the home screen, press the SELECT dial.
WX appears on the screen.
Turn the SELECT dial to change the weather channel.
When tuning weather broadcasts, select ALERT to enable or
disable weather alerts.
indicates that weather alerts are enabled.
Select EXIT.
The radio returns to normal operation while continuing to
monitor weather alerts.
Digital Selective Calling
5). An MMSI number identifies each
(Automatic Transmitter Identification System,
8).
to return to the previous entry in
(Entering Your
NOAA
®
Weather Broadcasts and Alerts