- ページ 31

食器洗い機 AEG FAVORIT 44010 VIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG FAVORIT 44010 VI 40 ページ。 Electrolux dishwasher user manual

Once these checks have been carried out, switch on the appliance: the programme

will continue from the point at which it was interrupted.

If the malfunction or fault code reappears contact the Service Force Centre.

For other fault codes not described in the above chart, please contact your local

Service Force Centre, quoting the model (Mod.), product number (PNC) and serial

number (S.N.).

This information can be found on the rating plate located on the side of the

dishwasher door.

So that you always have these numbers at hand, we recommend you to make a

note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .

The dishes are not clean

The dishes are wet and dull

There are streaks, milky spots or a bluish coating

on glasses and dishes

Water drops have dries onto glasses and dishes • Increase rinse aid dosing.

The wash results are not satisfactory

• The wrong washing programme has been se-

• The dishes are arranged in such a way as to

• The spray arms do not rotate freely due to

• The filters in the base of the washing com-

• Too little or no detergent has been used.

• Where there are limescales deposits on the

• The drain hose connection is not correct.

• The salt container cap is not properly closed.

• Rinse aid was not used.

• The rinse aid dispenser is empty.

• Decrease rinse aid dosing.

• The detergent may be the cause. Contact the

What to do if...

lected.

stop water reaching all parts of the surface.

The baskets must not be overloaded.

incorrect arrangement of the load.

partment are dirty or incorrectly positioned.

dishes; the salt container is empty or the in-

correct level of the water softener has been

set.

detergent manufacturer's consumer care line.