- ページ 11

食器洗い機 AEG FAVORIT 44050 ViのPDF ユーザー情報をオンラインで閲覧またはダウンロードできます。AEG FAVORIT 44050 Vi 40 ページ。 Fully integratable dishwasher
AEG FAVORIT 44050 Vi にも：ユーザーマニュアル (48 ページ)

ページを印刷する

Setting the Amount of Rinse Aid Required

Only change the amount dispensed, if smears, milky spots (reduce the

amount) or dried on water spots (increase the amount) can be seen on

glasses and dishes. (See section "If dishwashing results are not satisfac-

tory".) The dosage can be set from 1-6. The dosage is pre-set to "4" in

the factory.

1. Open the dishwasher door.

2. Press the release button on the rinse

aid compartment.

3. Open the cover.

4. Set the dosage level.

5. Press the lid shut until it clicks into

place.

6. If rinse aid has leaked out, wipe it

away with a cloth.

Activating/deactivating the acoustic signal

In addition to the optical display (e.g. indicating the end of the cycle,

errors) you can also choose to set an acoustic signal.

1. Press the ON/OFF button.

If the LED indicator of only one programme button is illuminated, this

wash programme has been activated. The wash programme must be

deselected:

Press function buttons 2 and 3 simultaneously for approx. 2 seconds.

The LED indicators of all the buttons that can be selected will illumi-

nate.

2. Press function buttons 2 and 3 simultaneously and hold them down.

The LED indicators for function buttons 1 to 3 will flash.

3. Press function button 3.

The LED indicator for function button 3 will flash.

The end of wash programme indicator displays the current setting:

End of wash programme indicator

is illuminated:

End of wash programme indicator

is not illuminated:

Acoustic signal activated

(factory setting)

Acoustic signal deactivated