- ページ 15

海上ラジオ Garmin GTX 335のPDF パイロット・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin GTX 335 34 ページ。 All-in-one ads-b transponder

ページを印刷する
Garmin GTX 335 パイロット・マニュアル
2.4

Function Keys

IDENT The IDENT key activates the IDENT function for 18 seconds. This distinguishes your
transponder from others on the air traffic controller's screen. The word "IDENT" will appear
in the upper left corner of the display during this time.
VFR
The VFR key sets the transponder code to the preprogrammed VFR code, which is selected
during installation configuration (this is set to 1200 at the factory).
To restore the previous identification code, press the VFR key a second time.
To toggle between these two codes, continue to press the VFR key.
FUNC
The FUNC key cycles through four menu groups shown on the right-hand side of the display.
Menu groups include:
Transponder (XPDR)
Timers (TMR)
Altitude (ALT)
System (SYS)
ENT
The ENT key acknowledges the selection of menu items and pilot data entry fields.
CRSR
The CRSR key activates the cursor to select items in menus and on pages.
CLR
The CLR key clears selected entry and exits the menus.
8
The key enters the number eight in the Flight ID or Count Down timer.
It navigates up and between the functions and settings within a menu group.
9
The key enters the number nine in the Flight ID or Count Down timer.
It navigates down and between the functions and settings within a menu group.
190-01499-00 Rev. A

Table 2-3 Function Keys

Garmin GTX 335/345 Pilot's Guide
2 – GTX 3X5 CONTROLS
2-3