- ページ 8
ペットケア製品 Garmin ATEMOS 50 WITH K5のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin ATEMOS 50 WITH K5 22 ページ。
ページを印刷するThe handheld device can track up to 20 dogs with dog collar
devices. If you purchase additional dog collar devices, you can
link them to the handheld device.
1
Select DOG.
2
Select Add Dog.
3
Turn off the dog collar device.
4
Follow the on-screen instructions.
By default, the new dog is named "Dog" and an ID number is
randomly assigned.
An error message could appear if there is a conflict with the
ID number of another dog.
After pairing is complete, you can add the dog collar device to
additional handheld devices using the dog collar device track
code or control code.
Adding a Dog Using the Track and Control Codes
NOTE: This feature varies based on dog collar device type and
feature availability in your area.
Before you can add a dog using the track and control codes, the
dog owner must find the track and control codes
Dog ID and Track and Control Codes, page
to you.
You can use track and control codes to authorize a handheld
device to interact with your dog collar device. If you are not near
the dog you want to add or you cannot put the collar into pairing
mode, you can add the dog using the track and control codes.
1
Select DOG > Add Dog.
2
When asked if you are near the collar, select No.
3
When asked if you know the track and control codes, select
Yes.
4
Enter the track or control code for the collar, and select
Done.
The dog's track code allows you to track the dog. The dog's
control code allows you to both track the dog and access the
collar settings.
5
Enter the name of the dog, and select Done > OK.
Finding the Dog ID and Track and Control Codes
You can share a dog's track code so another person can track
your dog. Also, you can share a dog's control code so another
person can track your dog and access the collar settings.
1
Select Dog List.
2
Select a dog.
3
Select Show Info.
Assigning a Dog ID Manually
Before you can assign a dog ID manually, you must turn on the
dog collar device and bring it within 3 m (10 ft.) of the handheld
device. You must assign a new ID number to the dog.
1
Select DOG.
2
Select a dog.
3
Select Show Info > MENU > Change ID.
4
Select an unassigned and nonconflicting ID.
Changing the Update Rate
You can select a longer duration for the update rate to conserve
battery power. The 30-second and 2-minute rates reduce battery
drain, but they record less-detailed dog tracks and statistics.
1
Bring the handheld device within a few feet of the dog collar
device.
2
Select DOG.
3
Select a dog.
4
Select Show Info > MENU > Change Update Rate.
5
Select an update rate.
4
Communication with the Collar
You should keep an unobstructed line of sight between your
handheld device and the dog collar device to produce the best
communication signal. To achieve the best line-of-sight
conditions, you should move to the highest elevation point in
your area (for example, on the top of a hill).
Best
Good
Poor
Tracking with BaseCamp
(Finding the
Before you can track your dogs and contacts using BaseCamp,
4) and tell them
you must download BaseCamp to your computer
(www.garmin.com/basecamp).
The BaseStation feature of BaseCamp allows you to track your
dogs and contacts in real-time on a computer. For more
information on using BaseCamp, see the help file in the
application.
1
2
3
You can track other hunters so you know where they are at all
times. One Atemos 50 handheld device can track up to 20
devices, including compatible dog collar devices and handheld
devices.
NOTE: You can only track Atemos 100 handheld devices on
your Atemos 50 handheld device.
Adding a Contact Using MURS/VHF
Before you can add a contact using MURS/VHF, you should be
near the contact.
You can add fellow hunters to your handheld device so you can
track them on the map
1
2
3
4
The contact is added to your handheld device.
Adding a Contact Using a Contact ID
If you are not near the hunter you want to add, you can add the
hunter using a contact ID.
1
2
3
4
Select Setup > System > BaseCamp Basestation >
Prompted.
Open BaseCamp.
Follow the on-screen instructions.
Contact Tracking
(Tracking a Contact, page
On your handheld device, select MENU > Tools > Contacts
> Add.
Bring the two handheld devices near each other, and select
Yes on your handheld device.
On the contact's handheld device, select Contacts > Pair.
On your handheld device, enter the name of the contact, and
select Done > OK.
On your handheld device, select Tools > Contacts > Add.
When asked if you are near the other handheld device, select
No.
When asked if you know the contact ID, select Yes.
Select the contact ID for the contact you are adding.
BaseStation
™
5).
Contact Tracking