- ページ 22

食器洗い機 AEG FAVORIT 50874のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG FAVORIT 50874 28 ページ。 Electrolux dishwasher favorit 50874

ページを印刷する

Technical data

Problem

Dry water drop stains on

glasses and dishes.

The dishes are wet.

The dishes are wet and dull.

How to activate the rinse aid dispenser

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons B and C.

– The indicator lights for function buttons A, B, and C start to flash.

4. Release function buttons B and C.

5. Press function button B.

– The indicator lights for function buttons A and C go off.

– The indicator light for function button B continues to flash.

– The display shows the current set.

6. Press function button B again.

– The display shows the new adjustment.

7. Switch off the appliance to keep the operation.

Technical data

Dimensions

Water supply pressure

Water supply

Capacity

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

Rinse aid dosage is too low.

The detergent can be the cause. Use a different brand of deter-

You have set a washing pro-

gramme without drying phase

or with a decreased drying

phase.

The rinse aid dispenser is emp-

ty.

The multitab function is on.

(The rinse aid dispenser is au-

tomatically off).

Width

Height

Depth

Minimum

Maximum

Cold water or hot water

Place settings

Possible cause

Rinse aid dispenser deactivated

Rinse aid dispenser activated

Possible solution

Increase the rinse aid dosage.

gent.

Let the door stay ajar for some

minutes before you remove the

dishes.

Fill the rinse aid dispenser with

rinse aid.

Activate the rinse aid dispenser.

Refer to 'How to activate the

rinse aid dispenser'.

0,5 bar (0,05 MPa)

8 bar (0,8 MPa)

maximum 60 °C

596 mm

850 mm

625 mm