- ページ 5

ペットケア製品 Garmin Pro 70のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin Pro 70 17 ページ。
Garmin Pro 70 にも：オーナーズマニュアル (16 ページ), バッテリー交換方法 (10 ページ)

Plug the power cable into a power

source.

The status LED is solid red when the

collar is charging.

After the status LED turns solid green,

remove the charging clip from the

collar.

Turning On the Dog Collar Device

• On the dog collar device, hold the

power key until the status LED turns

green and the collar beeps to turn it

on in training mode.

• On the dog collar device, hold the

power key until the status LED turns

blue to turn on the BarkLimiter™

feature (page 9).

• On the dog collar device, hold the

power key until the status LED turns

yellow to enter pairing mode

(page 5).

Turning Off the Device

On the dog collar device, hold the

power key until the red LED appears.

Release the power key.

The dog collar device beeps to

confirm powering off.

NOTE: If the device is powered off in

BarkLimiter mode, the LED flashes

the number of corrected barks before

powering off (page 10).

Dog Collar Device

You can use up to 6 dog collar devices

with a single handheld device.

Each dog collar device must be paired

with the handheld device before it can be

used. During the pairing process, each

dog collar device is associated with a

different color on the handheld device.

Pairing a Dog Collar Device with the

Handheld Device

NOTE: If your handheld device and dog

collar device were included in the same