- ページ 3

ペットケア製品 Garmin T5 miniのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin T5 mini 4 ページ。 Dog collar device
Garmin T5 mini にも：オーナーズマニュアル (24 ページ), オーナーズマニュアル (8 ページ), クイック・スタート・マニュアル (10 ページ)

Charging the Dog Collar Device

NOTICE

To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the

charging clip.

NOTE: Your dog collar device may look different than the device pictured.

You should fully charge the battery before you use the device for the first time. Charging a fully depleted battery

takes about five hours.

1 Snap the charging clip

onto the device

2 Plug the small end of the power cable into the mini-USB port on the charging clip cable.

3 Plug the power cable into a power source.

The status LED is solid red when the collar is charging.

4 After the status LED turns solid green, remove the charging clip from the collar.

Acquiring Satellite Signals

Both the collar and handheld device must acquire satellite signals before you put the collar on your dog.

Acquiring satellites can take a few minutes.

1 Go outdoors to an open area.

2 Turn on both devices.

in the status bar shows the GPS signal strength.

When the collar has acquired satellite signals, the status LED flashes a double-blink or triple-blink in green.

Quick Start Manual