- ページ 30

ミシン Brother XL5050のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Brother XL5050 45 ページ。 Brother sewing machine operation manual

ページを印刷する

XL5000us.book Page 29 Tuesday, November 11, 2003 9:25 AM

Overedge Stitching

Stitch Name Pattern

Stretch

Overlock

Stitch

Elastic

Overlock

Stitch

Arrowhead

Stitch

You can use these stitches to join together seams and

finish them in one operation. The Overlock Stitches

are also useful for sewing stretch materials while the

Arrowhead Stitch is ideal for sewing the edge of a

blanket.

Set the pattern selection dial to the Elastic

Overlock, Stretch Overlock or Arrowhead.

Put the fabric under the presser foot so that

the seamline (or arrowhead point) is

approximately 3 mm (1/8") to the left of the

center of the presser foot. This stitch works

best with a seam allowance of approximately

6 mm (1/4") as this allows the right (zigzag)

side of the stitch to overlock the cut edge of

the fabric.

Stitch

Length

Width

[mm (inch)]

3.5

(1/8)

Fixed 2.5

(3/32)

(3/16)

If the seam allowance is wider than the stitch

pattern, trim away any excess fabric after

stitching.

A finished Elastic Overlock Stitch is shown in the

diagram below.

Feather Stitching

Stitch

Stitch Name Pattern

Length

[mm (inch)]

Fixed 2.5

Feather Stitch

(3/32)

Use the Feather Stitch as a decorative top-stitch

when hemming blankets, tablecloths or draperies, or

when embroidering.

Set the pattern selection dial to the Feather

Stitch.

Place the fabric right side up and sew 1 cm

(3/8") from the edge of the fabric.

Trim close to the stitching.

The stitch will prevent the fabric from unravelling.

Stitch

Width

[mm (inch)]

(3/16)