- ページ 12

食器洗い機 AEG Favorit 65080 ViのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG Favorit 65080 Vi 40 ページ。 Electrolux dishwasher product manual

Prior to Using for the First Time

Setting the Amount of Rinse Aid Required

Only change the amount dispensed, if smears, milky spots (reduce the amount)

or dried on water spots (increase the amount) can be seen on glasses and dishes.

(See section "If dishwashing results are not satisfactory".) The dosage can be set

from 1 6. The dosage is pre set to "4" in the factory.

1. Open the dishwasher door.

2. Press the release button on the rinse aid

compartment.

3. Open the cover.

4. Set the dosage level.

5. Press the lid shut until it clicks into place.

6. If rinse aid has leaked out, wipe it away

with a cloth.

Activating/deactivating the acoustic signal

In addition to the optical display (e.g. indicating the end of the cycle, errors) you

can also choose to set an acoustic signal.

1. Press the ON/OFF button.

If the LED indicator of only one programme button is illuminated, this wash pro

gramme has been activated. The wash programme must be deselected:

Press function buttons 2 and 3 simultaneously for approx. 2 seconds.

The LED indicators of all the programme buttons that can be selected will illumi

nate.

2. Press function buttons 2 and 3 simultaneously and hold them down.

The LED indicators for function buttons 1 to 3 will flash.

3. Press function button 3.

The LED indicator for function button 3 will flash.

The multi display will indicate the current setting:

4. Pressing function button 3 will change the setting.

5. Once the multi display is indicating the required setting, press the ON/OFF but

ton. The setting is now saved.

Acoustic signal deactivated

Acoustic signal activated (factory setting)