オール・イン・ワン・プリンター Brother DCP-197CのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-197C 2 ページ。 Dcp-193c; dcp-195c; dcp-197c
Brother DCP-197C にも： 部品リファレンスリスト (32 ページ)
ページを印刷する
Unpack the machine and check the components
1
Start Here
IMPORTANT
DO NOT connect
the USB cable yet.
a.
Warnings tell you what
b.
WARNING
to do to prevent possible
personal injury.
c.
Illustrations in this Quick Setup Guide are
based on the DCP-195C.
d.
Fan the stack of paper well.
e.
Gently put the paper into
the paper tray. Check that
the paper is flat in the tray.
f.
Gently adjust the paper side
guides to the paper with
both hands.
Make sure the paper side
guides touch the edges of
IMPORTANT
the paper.
DO NOT push the
paper in too far.
Install the ink cartridges
5
a.
c.
The LCD shows:
Remove the green protective part a.
No Cartridge
b.
Open the ink cartridge cover a.
1
Check the print quality
6
a.
b.
When the preparation process
Check the quality of the four colour
has finished, the LCD shows this
blocks
a
on the sheet.
message.
(black/yellow/cyan/magenta)
Set Paper and
Press Start
Press Colour Start.
o
If all lines are clear and visible, press
to finish the quality check.
o
If you can see missing short lines, press
and follow the steps on the LCD.
Before you can use the machine, read this Quick Setup Guide
for the correct setup and installation.
LX1506004
UK/IRE/GEN
Printed in China
Note
•
The components of your box may differ depending on your
country.
•
Save all packing materials and the box in case for any
reason you must ship your machine.
•
A USB cable is not included.
You need to purchase a USB 2.0 cable that is no more
than 2 metres long.
1
Approx. 65% yield of the replacement cartridge. For details, see
Remove the protective tape and film.
Consumable items in the User's Guide.
WARNING
Remove the plastic bag
a
containing the ink cartridges
from on top of the paper tray.
Plastic bags are used in the packaging of your
machine. To avoid danger of suffocation, please
Make sure you have all components.
keep these bags away from babies and children.
g.
Close the output paper tray
cover and slowly push the
paper tray back into the
machine.
d.
Unpack the ink cartridge.
Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum
seal, then remove the cap a.
1
1
Set the LCD contrast (if needed)
7
a.
b.
c.
1
d.
OK
a (Yes)
e.
Poor
b (No)
Load plain A4 paper
2
a.
Pull out the paper tray.
Inbox Ink
1
1
Cartridges [x4]
Black
Yellow
Cyan
Magenta
Power Cord
CD-ROM
Quick Setup
User's Guide
Guide
Connect the power cord
3
h.
a.
Pull out the paper support
a
until
Connect the power cord.
it clicks, and then unfold the paper
support flap b.
The machine must be fi tted with an earthed plug.
2
1
e.
Set the date and time
8
a.
Press Menu.
Press a or b to choose
b.
0.Initial Setup, and then press OK.
Press a or b to choose
2.LCD Contrast, and then press OK.
c.
Press a or b to choose Dark or Light.
Press OK and then Stop/Exit.
b.
Lift the output paper tray cover a.
1
Set the language
4
a.
WARNING
IMPORTANT
DO NOT connect the USB cable
b.
yet.
Note
The Warning LED on the control
panel will stay on until you have
installed the ink cartridges.
Install each ink cartridge in the direction of the arrow on the label.
a
Take care to match the colour of the lever
with the cartridge
colour b.
1
2
d.
Press Menu.
Press a or b repeatedly to enter the last two digits of
the year, and then press OK.
Year:2009
Press a or b to choose
0.Initial Setup, and then press OK.
(e.g. Enter 09 for 2009.)
e.
Repeat for Month and Day, and Hours and Minutes
Press a or b to choose
in 24-hour format.
1.Date&Time, and then press OK.
f.
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit to go back to step a.
Quick Setup Guide
DCP-193C DCP-195C DCP-197C
c.
1
Press and slide the
paper side guides
a
and paper length
b
guide
to fit the
paper size.
3
Make sure that the
triangular marks
c
on the paper side
2
a
guides
and paper
length guide
b
line
up with the mark for
the paper size you
are using.
3
c.
When the LCD shows this
Press a (Yes) to confirm the
message, press OK.
language setting.
Select Language
Press OK Key
Note
If you set the wrong language,
Press a or b to choose your
you can change it again after
language and press OK.
setting the date and time.
e
English
(For details see Changing LCD
language in Chapter 3 of the
User's Guide.)
Select ab & OK
f.
Gently push the ink cartridge until it clicks. After all the ink
cartridges are installed close the ink cartridge cover.
Note
The machine will prepare the ink tube system for printing.
This process will take approximately four minutes.
Do not turn off the machine.
Turn the sheet over.