- ページ 4

オール・イン・ワン・プリンター Brother DCP-340CWのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-340CW 11 ページ。
Brother DCP-340CW にも：クイック・セットアップ・マニュアル (43 ページ)

ページを印刷する

CHAPTER 8

MAINTENANCE MODE

Describes the maintenance mode which is exclusively designed for the purpose of checks, settings

and adjustments using the keys on the control panel.

In the maintenance mode, you can update memory (EEPROM: electrically erasable programmable

read-only memory) contents for optimizing the drive conditions of the head/carriage unit, paper feed

roller or paper ejection roller (if they have been replaced) or for setting the CIS scanner area, for

example. You can also customize the EEPROM according to the shipment destination of the

machine concerned. In addition, you can perform operational checks of the LCD, control panel PCB

or sensors, perform a print test, display the log information or error codes, and modify firmware

switches (WSW).

CHAPTER 9

ERROR INDICATION AND TROUBLESHOOTING

Details error messages and codes that the incorporated self-diagnostic functions display if any error

or malfunction occurs. If any error message appears, refer to this chapter to find which components

should be checked or replaced.

The latter half of this chapter provides sample problems that could occur in the main sections of the

machine and related troubleshooting procedures. This will help service personnel pinpoint and

repair defective components.

Appendix 1

Serial Numbering System

Shows the location of serial number labels put on some parts and lists the coding information

pertaining to the serial numbers.

Appendix 2

Firmware Installation

Provides instructions on how to update firmware stored in the flash ROM on the main PCB or load

firmware to a new main PCB from the host PC.

No hardware replacement is required for updating.

Appendix 3

Customizing Codes According to Shipping Destination

Provides instructions on how to set up the customizing codes for the various preferences

exclusively designed for each destination (e.g. language). Those codes are stored in the memory

(EEPROM) mounted on the main PCB. If the main PCB is replaced, therefore, you need to set up

the proper customizing code with the machine in the maintenance mode.

Customizing codes customize firmware for individual models, enabling the common firmware to be

used for various models. They come with the firmware data provided by Brother Industries.

Appendix 4

Firmware Switches (WSW)

Describes the functions of the firmware switches, which can be divided into two groups: one is for

customizing preferences designed for the shipping destination (as described in

other is for modifying preferences that match the machine to the environmental conditions. Use the

latter group if the machine malfunctions due to mismatching.

Appendix 5

Wiring Diagrams

Provides the wiring diagrams that help you understand the connections between PCBs.

Appendix 6

Circuit Diagrams

Provides the circuit diagrams of the MJ PCB and power supply PCB.

Appendix

3) and the

Confidential