- ページ 20

オール・イン・ワン・プリンター Brother DCP-585CWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-585CW 45 ページ。 Quick setup guide - spanish
Brother DCP-585CW にも：パンフレット＆スペック (2 ページ), クイック・セットアップ・マニュアル (29 ページ), (クイック設定ガイド (43 ページ)

Wired Network

Choose Wired Network Connection, and

then click Next.

For Windows

when this screen appears, choose Change the

Firewall port settings to enable network

connection and continue with the

installation. (Recommended) and click Next.

If you are using a firewall other than Windows

Firewall or Windows

may appear.

See the instructions provided with your firewall

software for information on how to add the

following network ports.

For network scanning, add UDP port 54925.

If you still have trouble with your network

connection, add UDP port 137.

XP SP2/Windows Vista

users,

Firewall is off, this screen

Note

• If the machine is configured for your network,

choose the machine from the list, and then click

Next.

This window will not appear if there is only one

machine connected on the network, it will be

chosen automatically.

If your machine shows APIPA in the IP

Address field, click Configure IP Address

and enter an IP address for your machine that

is suitable for your network.

• If the machine is not yet configured for use on

your network, the following screen appears.

Click OK.

The Configure IP Address window will

appear. Enter an IP address for your machine

that is suitable for your network by following the

on-screen instructions.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another.

Important

DO NOT cancel any of the screens during the

installation. It may take a few seconds for all

screens to appear.

Windows