- ページ 34

オール・イン・ワン・プリンター Brother DCP-585CWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-585CW 45 ページ。 Quick setup guide - spanish
Brother DCP-585CW にも：パンフレット＆スペック (2 ページ), クイック・セットアップ・マニュアル (29 ページ), (クイック設定ガイド (43 ページ)

Wireless Network

Note

• If the machine is configured for your network,

choose the machine from the list, and then click

Next.

This window will not appear if there is only one

machine connected on the network, it will be

chosen automatically.

If your machine shows APIPA in the IP

Address field, click Configure IP Address

and enter an IP address for your machine that

is suitable for your network.

• If your wireless settings fail, an error message

will appear during the installation of MFL-Pro

Suite and the installation will be terminated. If

you encounter this failure, go to step 12 on

page 27 and setup the wireless connection

again.

• If you are using WEP and the LCD displayed

'Connected' but your machine is not found,

make sure you entered the WEP key correctly.

The WEP key is case sensitive.

• If the machine is not yet configured for use on

your network, the following screen appears.

Click OK.

The Configure IP Address window will

appear. Enter an IP address for your machine

that is suitable for your network by following the

on-screen instructions.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another.

Important

DO NOT cancel any of the screens during the

installation. It may take a few seconds for all

screens to appear.

Note

For Windows Vista

, when this screen appears,

click the check box and click Install to complete

the installation correctly.

When the On-Line Registration screen is

displayed, make your selection and follow the

on-screen instructions.

Windows