- ページ 4

オール・イン・ワン・プリンター Brother DCP-7030のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-7030 20 ページ。 Quick setup guide - spanish
Brother DCP-7030 にも：クイック・セットアップ・マニュアル (18 ページ), クイック・セットアップ・マニュアル (19 ページ), クイック・セットアップ・マニュアル (32 ページ), クイック・セットアップ・マニュアル (32 ページ), (クイック設定ガイド (20 ページ)

Getting Started

Carton components may vary from one country to another.

Save all packing materials and the carton in case for any reason you must ship your machine.

Warning

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these

bags away from babies and children.

1 Automatic Document Feeder (ADF) (DCP-7040 only)

2 Control Panel

3 Face-down Output Tray Support

4 Manual Feed Slot

5 Paper Tray

CD-ROMs

For Windows

For Macintosh

Drum Unit Assembly

(including Starter Toner Cartridge)

The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface

you intend to use (USB). Do NOT connect the interface cable at this time. Connecting the interface cable is done

during the software installation process.

USB interface cable

Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters). When you use a

USB cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard

or non-powered USB hub.

Your machine has a USB interface that is compatible with the USB 2.0 specification. This interface is also

compatible with Hi-Speed USB 2.0; however, the maximum data transfer rate will be 12 Mbits/s. The machine

can also be connected to a computer that has a USB 1.1 interface.

Quick Setup Guide

AC Power Cord

6 Front Cover

7 Power Switch

8 ADF Document Output Support Flap (DCP-7040 only)

9 Document Cover

User's Guide