- ページ 8

オール・イン・ワン・プリンター Brother DCP-7040のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-7040 19 ページ。 Quick setup guide - spanish
Brother DCP-7040 にも：クイック・セットアップ・マニュアル (20 ページ), クイック・セットアップ・マニュアル (18 ページ), クイック・セットアップ・マニュアル (32 ページ), (クイック設定ガイド (20 ページ)

STEP 1

Setting Up the Machine

Loading paper in the paper

tray

Pull the paper tray completely out of the

machine.

While pressing the green paper-guide release

lever, slide the paper guides to fit the paper

size you are using. Make sure that the guides

are firmly in the slots.

Note

(For Asia) For Legal size paper, press the release

button in the bottom of the paper tray and pull out

the back of the paper tray. (Legal size paper is not

available in some regions.)

Fan the stack of paper well to avoid paper jams

and misfeeds.

Put paper in the paper tray. Make sure that the

paper is flat in the tray and below the maximum

paper mark (1).

Caution

Make sure the paper guides touch the sides of the

paper so it will feed properly. If you do not this, it

may cause damage to your machine.

Put the paper tray firmly back into the machine.

Make sure that it is completely inserted into the

machine.