- ページ 10
オール・イン・ワン・プリンター Brother DCP-8070DのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-8070D 17 ページ。 Dcp-8070d
Brother DCP-8070D にも： クイック・セットアップ・マニュアル (16 ページ), クイック・セットアップ・マニュアル (20 ページ)
ページを印刷する
USB
For USB Interface Users
(Mac OS X 10.3.9 or greater)
11
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
12
Connect the USB cable
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
on the machine marked with the
Then connect the cable to your computer.
10
13
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click Start Here OSX to install.
c
The Brother software will search for the Brother
device. During this time the following screen
will appear.
d
Choose the machine from the list, and then
click OK.
e
When this screen appears, click OK.
The installation of MFL-Pro Suite is now
complete.
Go to step 14 on page 10.
14
When Presto! PageManager is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
symbol.
a
Double-click Presto! PageManager and follow
the on-screen instructions.
Finish
Macintosh
Install MFL-Pro Suite
Install
Presto! PageManager
The installation is now
complete.