- ページ 18

エアコン Fujitsu ABT seriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Fujitsu ABT series 20 ページ。 Floor console/under ceiling dual type
Fujitsu ABT series にも: 取扱説明書 (20 ページ), 取扱説明書 (18 ページ), 取扱説明書 (20 ページ)

Fujitsu ABT series 取扱説明書
OPERATING TIPS
Notice
Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
*G During use of the heating mode, the outdoor unit will
occasionally commence the defrost operation for brief
periods. During the defrosting operation, if the user sets
the indoor unit for heating again, the defrosting mode
will continue, and the heating operation will begin after
completion of defrosting, with the result that some time
may be required before warm air is emitted.
Temperature and Humidity Range
Outdoor temperature
Indoor temperature
Indoor humidity
G If the air conditioner is operated under higher temperature conditions than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of lower
temperatures than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
G Do not use this unit for any purposes other than the Cooling, (*)Heating, Dehumidifying, and air-circulation of rooms in
ordinary dwellings.
17
COOLING MODEL
HEAT & COOL MODEL
(Reverse Cycle)
*G During use of the heating mode, the top of the indoor
unit may become warm, but this is due to the fact that
coolant is circulated through the indoor unit even when
it is stopped; it is not a malfunction.
Cooling/Dry Mode
About 21 to 46 °C
About 0 to 46 °C
About 18 to 32 °C
About 80 % or less
If the unit is used for long pe-
riods under high-humidity
conditions, condensation
may form on the surface of
the indoor unit, and drip onto
the floor or other objects un-
derneath.
*Heating Mode
About –10 to 24 °C
About 30 °C or less