- ページ 31
食器洗い機 AEG KO_FAVORIT 80800のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG KO_FAVORIT 80800 48 ページ。 Aeg dishwasher user manual
ページを印刷する
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer's visit is not free of
charge, even during the period of guarantee.
... Error messages are displayed.
• If the multi-display shows the fault code (2 or if the display WATER
(WATER; EAU), DOOR (DEUR; PORTE) or SPRAY ARM (SPROIE-
ARM; BRAS) lights up, you may be able to remedy the fault yourself.
After remedying the fault (2 and the fault with the display WATER
(WATER; EAU), press the button of the started washing programme.
The wash programme continues. If the fault code is displayed again,
contact customer service.
• For all other faults that are indicated, please contact customer serv-
ice stating the fault code.
Malfunction
The programme display of
the selected programme
flashes, the display WATER
(WATER; EAU) lights up and
a constantly repeated
warning tone can be heard.
No water runs into the dish-
washer.
The programme display of
the selected programme
flashes, the multidisplay
shows the fault code and
constantly repeated warn-
ing tones can be heard.
The multidisplay shows the
fault code and constantly
repeated warning tones
can be heard.
Possible Cause
Tap is blocked or furred
with lime-scale.
The filter (where present)
in the threaded hose fit-
ting at the water inlet
valve is blocked.
The water inlet hose is
not correctly laid.
The siphon is blocked.
The water drain hose is
not correctly laid.
The anti-flood system
has been triggered.
Operating Instructions
Remedy
Clean tap.
Clean the filter in the
threaded hose fitting.
Check hose installation.
Clean the siphon.
Check hose installation.
Close the tap and contact
customer service.
31