- ページ 21

食器洗い機 AEG OKO FAVORIT 40250 iのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG OKO FAVORIT 40250 i 40 ページ。 Electrolux dishwasher user instructions 40300
AEG OKO FAVORIT 40250 i にも：ユーザーマニュアル (40 ページ)

ページを印刷する

Starting the Wash Programme

1. Check that when the dishes and cutlery are loaded into the dishwasher

the spray arms are free to rotate.

2. Open the tap fully.

3. Close dishwasher door.

4. Turn the programme selector clockwise to A

Table").

For interference suppression reasons, only operate the programme

selector with the dishwasher switched off. It is also possible that the

automated addition of detergent will be triggered.

5. Turn the programme selector to the required programme (see "Pro-

gramme Table").

Power indicator light illuminates. The selected wash programme starts.

The programme selector rotates during the wash programme and indi-

cates the position that has been reached in the programme.

If a wash programme has been started even though the tap was closed,

turn the programme selector to the I position, open the tap and start

the programme again.

Changing/Interrupting the Wash Programme

Only change or interrupt a wash programme in progress if it is abso-

lutely necessary.

Changing the wash programme

1. Turn the program selector to the I position. Power indicator light

goes out, wash programme stops.

Hot steam may escape when the door is opened. Open the door care-

fully.

2. Open dishwasher door and check whether there is still detergent in the

container. Refill the container if necessary.

3. Close dishwasher door.

4. Turn the programme selector clockwise to A

Table").

5. Turn the programme selector to the required programme (see "Pro-

gramme Table"). Power indicator light illuminates, wash programme

starts.

Operating Instructions

or B or C (see "Programme