- ページ 31

食器洗い機 AEG OKO FAVORIT 50750のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG OKO FAVORIT 50750 40 ページ。 Aeg dishwasher
AEG OKO FAVORIT 50750 にも：ユーザー情報 (40 ページ)

• If the dishwasher is installed under-

neath a kitchen work surface, the

original work surface of the dish-

washer is to be removed as follows:

– Unscrew the screws (1) from the

elbows on the back side.

– Slide the work surface approx.

1cm to the rear (3) , lift at the

front (4) and remove.

– Press the work surface retaining

brackets at the position shown in

the diagram (4) and remove the

bracket at an angle to the rear

(5).

• The dishwasher must also be screwed on tightly to the work surface

or to the adjoining units. This is absolutely necessary so that its sta-

bility is guaranteed according to VDE regulations.

If the dishwasher is later used as a free-standing appliance, the original

work surface must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Installation and Connection Instructions