- ページ 25
食器洗い機 AEG OKO FAVORIT 60850 iのPDF ユーザー情報をオンラインで閲覧またはダウンロードできます。AEG OKO FAVORIT 60850 i 40 ページ。 Aeg dishwasher öko favorit 60850 i
AEG OKO FAVORIT 60850 i にも： ユーザーマニュアル (48 ページ)
ページを印刷する
Malfunction
The cycle indicator for the
selected dishwashing cycle
is flashing:
the control indicator WA-
TER/EAU is lit,
Å 10
fault code
is dis-
played in the multi-display
(Problems with water in-
let).
The cycle indicator for the
selected dishwashing cycle
is flashing,
Å 10
fault code
is dis-
played in the multi-display
(there is water in the dish-
washer's internal dispens-
er).
Å 30
Fault code
is dis-
played in the multi-dis-
play.
The control indicator
DEUR/PORTE is lit.
The control indicator ZEEF/
FILTRE is lit.
Possible cause
Water tap is blocked with
limescale or faulty.
The tap is turned off.
The filter (where present) in
the threaded hose fitting
on the tap is blocked.
Filters in the base of the
washing compartment are
blocked.
Water inflow hose
has not been correctly posi-
tioned.
The sink outlet is blocked.
Water drain hose
has not been correctly posi-
tioned.
The anti-flood system has
been triggered.
The door of the dishwasher
is open.
The indicator ZEEF/FILTRE is
there to remind you to
check the dishwasher's fil-
ters occasionally and to
clean them, if necessary. It
lights up at regular inter-
vals, regardless of how
clean the filters are.
Remedy
Check the water tap and
have it repaired if necessary.
Turn the tap on.
Clean the filter in the
threaded hose fitting.
Press the button for the
dishwashing cycle that has
started;
then abort the dishwashing
cycle (see section: Starting
a dishwashing cycle);
clean filters (see section:
Cleaning the filters).
Check the position of the
hose.
Clean out sink outlet.
Check the position of the
hose.
First shut off the water tap,
then switch off the appli-
ance and contact the Cus-
tomer Care Department.
Close the dishwasher door.
The indicator goes out auto-
matically at the start of the
next dishwashing cycle.
25