- ページ 45

For Network Users

To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below.

Make sure the machine is idle, then disconnect all the cables from the machine (except the power cord).

Press Settings.

Press s or t to display Network, and then press Network.

Press s or t to display Network Reset, and then press Network Reset.

Press Yes.

Hold down Yes for 2 seconds to confirm.

The machine will restart, re-connect the cables once this is complete.

Up to four letters are assigned to each letter button on the Touchscreen. By pressing the correct button repeatedly,

you can access the character you want.

Press

to cycle between letters, numbers and special characters. (The characters available may differ

depending on your country.)

Inserting spaces

To enter a space, press

Repeating characters

If you need to enter a character that is on the same button as the character before, press c to move the cursor to

the right.

Making corrections

If you entered a character incorrectly and want to change it, press

character.

then press the space button

to delete it and re-enter the correct