オール・イン・ワン・プリンター Brother MFC-J480DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J480DW 2 ページ。
Brother MFC-J480DW にも： 製品安全マニュアル (25 ページ), ユーザーマニュアル (22 ページ), 製品安全マニュアル (21 ページ), よくある質問 (2 ページ), クイック・セットアップ・マニュアル (2 ページ)
ページを印刷する
MFC-J480DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
Unpack the machine and check the components
1.
2.
Watch our FAQ Videos for help
with setting up your Brother
machine.
solutions.brother.com/videos
Introductory Ink Cartridges [x4]
• Black
• Yellow
• Cyan
• Magenta
(Approx. 80% yield of the
Visit the Brother support website
replacement cartridge (Standard)
http://support.brother.com
uu Basic User's Guide: Supply
Specifications)
1
Load plain A4 paper
Pull the paper tray completely
out of the machine.
2
Connect the power cord
(Example for UK)
Connect the power cord. The machine
will power on automatically.
4
Install introductory ink cartridges
Open the ink cartridge cover, and
then remove the orange protective
part from the machine.
Remove the protective tape and film covering the machine and the LCD.
Make sure you have all components.
• The components included in the box may differ depending on your country.
Quick Setup Guide
Basic User's Guide
Product Safety Guide
CD-ROM
1
Open the output paper tray
Fan the paper well and load it in the tray,
cover a.
and then adjust the paper guides.
NOTE
You can adjust the control panel angle
to read the LCD more easily.
Follow the on-screen instructions to
install the ink cartridges.
The machine will prepare the ink
tube system for printing.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injuries.
NOTE
NOTE specifies the operating environment, conditions for installation,
or special conditions of use.
WARNING
Plastic bags are used in the packing of your machine. To avoid the danger of
suffocation, keep these plastic bags away from babies and children. Plastic bags
are not toys.
NOTE
• Save all packing materials and the box in case for any reason you must ship your
machine.
• You must purchase the correct interface cable for the interface you want to
use (for a USB connection).
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres
long.
Power Cord
(for UK)
(for others)
Telephone Line Cord
Close the output paper tray cover, and
then slowly push the tray completely
into the machine.
Connect the telephone line cord
3
If you are not using your machine as a fax, go to
(Example for UK)
Connect the telephone line cord.
Use the socket marked LINE.
5
Machine settings
When the machine has finished the initial cleaning process, follow the
on-screen instructions to configure the machine settings.
• Check print quality
• Set date and time
• Set Firmware Update Notice
• Print the installation sheet
LEW787004-00
UK
Version 0
NOTE
Pull out the paper support a, and unfold
the paper support flap b so that the
printed pages do not fall.
4
.
NOTE
If your machine is sharing one telephone line with an
external telephone, connect it as shown below.
1
2
a. Extension telephone
b. External telephone
2
1