- ページ 15

ホブ AEG 21604 GのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。AEG 21604 G 27 ページ。 Gas hob
AEG 21604 G にも：操作および設置マニュアル (26 ページ)

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so that the

washer is fitted between the components as shown in the diagram. Screw the parts together

without using excessive force.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or copper.

The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).

When the final connection has been made, it is essential that a thorough leak test is carried out

on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the end of the thread,

fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

FO 0814