- ページ 14

オール・イン・ワン・プリンター Brother MFC-J5740DWのPDF 製品安全マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J5740DW 23 ページ。
Brother MFC-J5740DW にも: クイック・セットアップ・マニュアル (2 ページ), クイック・セットアップ・マニュアル (2 ページ)

Brother MFC-J5740DW 製品安全マニュアル
Important Information for Australia

Important Safety Instructions

1. Read all of these instructions.
2. Save them for later reference.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall socket before cleaning the outside of the product and the
scanner glass (for the products with scanning functionality). Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should never be placed
near or over a radiator or heater. This product should never be placed in a built-in installation
unless adequate ventilation is provided.
8. This product should be connected to an AC power source within the range indicated on the
rating label. Do not connect it to a DC power source. If you are not sure, contact a qualified
electrician.
9. This product is equipped with a grounded plug, a plug having a third (grounded) pin. This
plug will only fit into a grounded power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, call your electrician to replace your obsolete outlet. DO NOT
defeat the purpose of the grounded plug.
10. DO NOT place anything on top of the power cord including this product. DO NOT allow the
power cord to be stepped on.
11. Do not place anything in front of the product that will block printouts. Do not place anything in
the path of received faxes.
12. DO NOT touch a document during printing.
13. Never push objects of any kind into this product through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
14. Do not attempt to service this product yourself. Opening or removing covers may expose you
to dangerous voltage points and/or other risks. Refer all servicing to service personnel.
15. Do not try and pick up pages that have not yet finished printing and exited the product.
16. Unplug this product from the wall outlet and refer servicing to Authorised Service Personnel
under the following conditions:
• When the power cord is damaged or frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally when the operating instructions are followed. Adjust
only those controls that are covered by the operating instructions. Incorrect adjustment of
14